Have you been searching all around for quick and easy steps to flash or unbrick any kind of Android phone or tablet? Then this post is for you.
The method I am going to analyze below has been tested and confirmed working extremely well on phones like the Infinix, Tecno, Gionee, LG, Samsung and iTel.
I will only share with you the quick and easiest method to do this and bring back your device no matter how stubborn it is.
Best Method to Flash/Fix Bricked Android Phones & Tablets
What We Needed:
- MT6577 USB VCOM Driver (W7/Vista/XP) – Download
- MT6577 USB VCOM Driver (W8 + W10) – Download
- USB data cable
- SP Flash Tool – Download
First, make sure that you have MediaTek USB VCOM drivers installed on your PC
How To Start Flashing New ROM
==> Go to the SP Flash Tool to open it (DON’T connect the phone yet)
==> Click “Scatter-loading” button to load the scatter file provided in the downloaded ROM ( you may see something like MT6575_Android_scatter_emmc.txt OR MT6577_Android_scatter_emmc.txt, all depending on the type of phone you have)
==> Ignore any message that may appear
==> Turn off the phone, remove the battery and replace it after some seconds (but don’t turn it ON).
==> Press F9 OR hit the “Download” button)
==> Connect your phone into the computer via USB data cable.
==> The process will start and a red progress bar will appear
==> After the red progress bar is complete, there will appear a purple progress bar (stay calm)
==> Right after the purple progress bar is complete, a message will appear underneath that reads:
“Please insert USB cable in x seconds”
==> Immediately after that, the download will start and you will see a yellow progress bar filling up
==> When the yellow progress bar is complete, you will see a pop-up with a green circle and Download OK message, which means that the flashing process is successful 🙂
==> You can now safely disconnect the phone from the USB cable and turn it on.
The process ends here.
If you have any question(s), I will be here to guide you during the flashing process and even after it.
At the above tutorial, you explained how to flash a normal android not bricked one, but in my case i have a bricked infinix x5010 it detect to the pc Mediatek usb port but it can’t go to DA so that i can flash it or read flash file, please assist me with tricks/steps of what to do in order to force detect DA PRELOADER to unbrick my phone.
hello sir. pls am having problem installing my mediatek vcom driver. it is saying this device cannot start code 10. Pls i need ur help sir. thank you.
Please i need help, am rebooting my tecno ipad but after it shows me to put my email and password i used be fore it opens, when i put it, it fails to open. what can i do to open it up. thanks
the solution is to download the stock rom or look for frp remove tool