Did you just buy yourself a new MiFi? Cool. It will serve you well, especially if you set it up on the least costly data plan you can find. All your devices are set up to automatically connect to the personal network and things get smooth from then on.
Page Contents:
However, you could get locked out from time to time, since we sometimes fail to remember the passcode because our devices always connect automatically. Not to worry though, no need to panic, because this issue can be resolved seamlessly.
Getting locked out of your own MiFi is a frustrating experience. Those that have faced it will know what this writer is writing about. It makes you feel completely useless and it leaves you out in the cold. Fortunately for you though, a factory reset can end your problems. See How To Reset Your Mifi Router:
How Can I Reset My Alcatel LinkZone MiFi?
These gadgets are not too technical at all. They simply come with a USB port, some LED lights, 2 buttons and that’s it. To reset this MiFi device, just hold down the “Power” and “WPS” buttons for fifteen seconds. The LED lights will all come on, just continue holding both buttons down until they all turn off. As soon as that happens, release the buttons. The light will come on and your device just experienced a factory reset. Make use of the default logins that are in the device packaging to get yourself logged in.
Users can also access the default SSID and Password under the device’s battery or on a sticker on its back cover. If getting the password proves difficult, get the MiFi plugged into your PC and access the Admin Web Interface. Most times, that should be 192.168.1.1 or 192.168.0.1. From this router menu, set a fresh Wi-Fi name (SSID), and Password.
How Can I Reset My ZTE Mobile Hotspot?
Several ZTE MiFi devices come with a “Reset” button. To reset your MiFi, just find this button and with a paper clip, press and hold the reset button until “MiFi Resetting” is visible on the screen. When that is seen, release the button. Hold on for several minutes for the restore process to be completed.
You Might Also Want To Read: Connect your Device Wirelessly with these 5 Best MiFi Devices
When the process is wrapped up, get yourself logged in with the credentials on the device’s back cover. If it cannot be found, get your MiFi plugged into your PC with a USB. Access the admin web interface, mostly 192.168.1.1 and go through the setup process. It will lead to you setting a fresh name and Password.
How Can I Reset My Huawei Value MiFi?
- Power on your Mobile Wi-Fi.
- Take off your Mobile Wi-Fi’s battery cover. The Reset button will be seen close to the power key.
- With a pin, press and hold the Reset button for 5 seconds.
- The Mobile Wi-Fi will automatically restart and default settings will be restored.
You Might Also Want To Read: How To Unlock Glo Huawei MiFi e5573s-606
You can locate your Mobile Wi-Fi name (SSID) and Wi-Fi key printed inside your Mobile Wi-Fi battery cover. Get yourself logged into the admin and change your WiFi name and Password.
You are done.
